Cast polyamide PA6G
PA6G (Cast Polyamide) is a plastic with a high mechanical, physical, electrical and chemical resistance. It is especially resistant against loads, impact and fatigue. It is not recommended for use in humid environments as it is known to absorb water.
PA6G (Cast Polyamide) is a plastic with a high mechanical, physical, electrical and chemical resistance. It is especially resistant against loads, impact and fatigue. It is not recommended for use in humid environments as it is known to absorb water.
Use temperature of +100 С;
Low coeficient of friction
Very high press resistance, high hardness
High impact resistance
Heat resistance
Chemical subsatnce resistance
Less water absorption when compared to Nylon 6
| Physical properties | Test method | Polikes® (PA6G) Cast Polyamide | |
| DN | ISO | ||
| Specific gravity g/cm3 | 53479 | 1183 | 1.15 |
| Service temperature 00С | 53461 | 75 | 100 |
| Melting point 00С | – | – | 190 |
| Thermal elongation 1/К*10-5 | 53752 | – | 8-9 |
| Tensile strength N/мм2 | 53455 | 527 | 55-85 |
| Tensile elongation % | 53455 | 527 | – |
| Rupture resistance N/mm2 | 53455 | 527 | 88-90 |
| Elongation at rupture % | 53455 | 527 | 10-40 |
| Impact resistance Kj/m2 | 53453 | 179 | – |
| Notch impact resistance Kj / m2 | 53453 | 179 | – |
| Elasticity module N/mm2 | 53452 | 178 | 3900-4200 |
| Water absorption % | 53495 | 62 | 6-7 |
| Volumetric resistance Ωx cm | 53482 | 167 | >1015 |
| Superficial resistance Ω | 53482 | 167 | >1012 |
| Dielectricity resistance kV/mm | 53481 | 243 | 80-100 |
| Corrosion (Sand slurry test) % | 58836 | – | – |
| Shore Skala D | 53505 | 85 | |
| Rockwell Skala | – | 2039-2 | M88 |
| Ball Notch 358/30 N/mm2 | 53456 | 2039-1 | 110-160 |
на.
Skids, wheels, rolls, gears, bearings, reels, hoops, wearing plates, parts for food articles, chemistry, textile and printing industries.